FOB Price
Get Latest Price( Negotiable )
|1 Set Minimum Order
Country:
China
Model No:
todaymachine
FOB Price:
( Negotiable )Get Latest Price
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
1 Set
Packaging Detail:
plywood crate package
Delivery Time:
7 days
Supplying Ability:
200 Set per Month
Payment Type:
T/T, Western Union
Product Group :
-
Contact Person Ms. Paige
todaymachine.com, Shantou, Guangdong
Model: TD**0
Product details and matters needing attention:
The connecting shaft and motor shaft connected directly, when motor starts running, drive the connecting shaft and a set of working on the connection shaft of the mill. For material from the hopper into the grinding powder, mill spindle and grinding sets of relative operation, ground into small pieces of material particle crushing force;After ground spiral motion of small particles in the mill was brought into the two piece of grinding, grinding indented relative to the operation, make the material in a short period of time were shattered into tiny particles (powder); Powder from grinding tooth ditch and thrown around .At the same time being loaded on the mill powder plate down, flowing from powder outlet.
Technical parameters:
Electric pressure |
motor power |
motor speed |
Final fineness |
Production capacity |
Overall size |
weight: |
**0V/*0HZ **0V/*0HZ |
2.2KW
|
***0r/min
|
*****0 mesh
|
*0 - *0 kg/h
|
**0***0***0 (mm) |
*0 kg |
operation and adjustment:
1.Mill should be placed at
the levels of fixed, robust desktop or table, solid wood is better.
Iron plate under the bottom of motor with four screw holes. motor
iron plate with long screw through the screw holes firmly fixed on
the desktop or table ; It is more better if fix rubber mat between
motor and desktop, which can reduce vibration, achieve better mute
effect.
2.motor cover should be fixed on the desktop ,make the motor cover
and plate separate,to prevent the vibration and resonance between
iron plate and motor , then tighten motor cover by short screw.
3.open the cover, then put millsone fix on the connection shaft ,
pressing with two thumbs on the mill , if the mill can free
stretch,that proof mill and connecting shaft cooperate well. Colse
the cover ,tighten screw , check the power supply, turn on the
switch, check whether the mill Operation specified
direction,sound,shake is running normal . if there is any abnormal
sound or vibration, should shutdown check, until returned to
normal, can be restarted.
4.Open the mains,work about 1minutes, put material into chute.
Twist regulator to appropriate location. open blanking
baffle,material can slowly flowing to grinding chamber. damper to
open a little bit small, To avoid feed fast,jammed
motor.Generally speaking ordinary materials needs grinding two
times, one is Coarse grinding, another is fine grinding.
5.milling thickness can adjustment by yourself ,which is depends on
clearance between two pieces of grinding, the grinding of the
clearance by regulator to control, according to order the thickness
on the cover, when the regulator to the direction of the fine
adjustment, two grinding gap narrowed, flour is thinner;Otherwise
the grinding powder coarsening.
6.strength of regulator adjusting range and how to control, can
through the ears to hear the sound of abrasive disc friction and
the voice of the motor running, grinding, the more closer louder
voice and even sharper; Conversely, grinding or not closer
separation, voice is soft.
7.separate grinding is particularly high oil content of the
material such as sesame seed, walnut, peanut, oil content is
extremely high,so this kind of material can only be grinding coarse
, because these material has a large number of oil filters through,
will make powder slurry. So grinding materials particularly high
oil content, governor don't adjust too tight, mill piece clearance
stay somewhat close to or even completely separate, can be ground
into powder (granule). Above material if need to wear very thin,
need material with no oily or low oil content, high oil content and
low oil content the proportion of the material as follows: 1:1:4 to
5, and take the ground twice, the first time, coarse grinding, fine
grinding.
8.Install about Static grinding and dynamic grinding:
Dynamic grinding assemble in millstone ,Static grinding assemble in
crush cavity. will be fixed grinding three screws removed, the
grinding can be unloaded. The hardness of grinding is made of cast
iron, cast iron is about *2 °, the hardness, flexibility is poor.
With mill, screw can not be screwed too tight, in case of grinding
fracture.
Notices:
1. Must external circuit
protection, overload protection device, in order to protect the
machine and personal safety.
2.This machine is only can grinding dry material , the more dry
material , the more fineness.
3.Needs to be fixed in a solid level of the desktop and on the
counter, the most reduce vibration and noise.
4.In the process of machining, such as suddenly shut down by power
outages and other reasons, must be clean-up residual material in
the crushing cavity, then start again.
5.After the machine start ,should manufacture material until run
faultlessly.notice the feed rate to prevent motor overload.
6.Machine after each use, should be clean inside, dry and
ventilated.
7.If Machine not to work, should cut off power supply. Keep upright
and don't put weight on it.
8.One full years’ warranty and lifetime maintenance service: any
problem caused by the equipment itself in the first two years after
purchase, new spare parts will be provided freely. After that,
spare parts will be supplied with cost price.
Country: | China |
Model No: | todaymachine |
FOB Price: | ( Negotiable ) Get Latest Price |
Place of Origin: | - |
Price for Minimum Order: | - |
Minimum Order Quantity: | 1 Set |
Packaging Detail: | plywood crate package |
Delivery Time: | 7 days |
Supplying Ability: | 200 Set per Month |
Payment Type: | T/T, Western Union |
Product Group : | - |